Navigation: Home / HSK (DIN 69893-1)/ Tapping Collet Chuck Holder
HSK (DIN 69893-1)





PRODUCTS

Tapping Collet Chuck Holder

 

Taper Part No. D D1 L Approx Wt in Kgs.
HSK A 63 FT HSK A 63 TCH ER 32 140 63 50 140 2.4
HSK A 100 FT HSK A 100 TCH ER 32 125 100 50 125 3.0

 

 

i

HOW TO USE


     1. The Collet & Nut are assembled as per normal collet chuck.
     2. Insert tap into the collet and tighten the clamping Screw to ensure the square of
          the tap is clamped and the tap is centered.
     3. Tighten the collet nut to clamp the diameter of Tap.
     4. Ensure that the collet nut & the clamping screw of tap square are tightened before mounting on machine.

 

The above Tapping Collet Chucks are designed to perform Tapping with Synchronised Feed Mechanism. Collets, Collet Nuts & Spanners are the same as other Standard ER Collet Chuck Holders.

 

 

i

Collet Nut and Stopper Screw supplied as part of the Chuck.

Spanner to be ordered seperately.


 

 

 

 

 

 
Copyright 2009 Falcon Toolings. All rights reserved